产品[
Elcometer 3230 湿膜轮
]资料
如果您对该产品感兴趣的话,可以
产品名称:
Elcometer 3230 湿膜轮
产品型号:
Elcometer 3230
产品展商:
时代山峰仪器商城
简单介绍
Elcometer 3230 湿膜轮，正如Elcometer 120一样由三个圆轮组成。中心的圆轮直径较小，其圆心与外侧的两个圆轮的圆心不同。沿湿膜滚动湿膜轮，中心轮湿润部分末端的读数即为湿膜厚度。
Elcometer 3230 湿膜轮的详细介绍
简单介绍
Elcometer 3230 湿膜轮，正如Elcometer 120一样由三个圆轮组成。中心的圆轮直径较小，其圆心与外侧的两个圆轮的圆心不同。沿湿膜滚动湿膜轮，中心轮湿润部分末端的读数即为湿膜厚度。
Elcometer 3230 湿膜轮
的详细介绍Elcometer 3230 湿膜轮
如果知道涂层的干、湿比率，便可通过湿膜厚度计算干膜厚度。
不同的测量量程从0~25μm（0~1mils）至0~3000μm（0~40mils）。 - 连续刻度，测量精确度为±5%。
- 适用于平面和曲面测量。
- 不锈钢材质，耐磨损，用溶剂清洗后可重复使用。
Elcometer 3230 湿膜轮
| 型号 | 分类 | 量程 | 分度 | 零件号 |
| Elcometer 3230/1 | Elcometer 3230 湿膜轮 | 0~25μm | 1.25μm | K0003230M001 |
| Elcometer 3230/16 | Elcometer 3230 湿膜轮 | 0~40μm | 2.0μm | K0003230M016 |
| Elcometer 3230/2 | Elcometer 3230 湿膜轮 | 0~50μm | 2.5μm | K0003230M002 |
| Elcometer 3230/3 | Elcometer 3230 湿膜轮 | 0~100μm | 5.0μm | K0003230M003 |
| Elcometer 3230/4 | Elcometer 3230 湿膜轮 | 0~150μm | 7.5μm | K0003230M004 |
| Elcometer 3230/5 | Elcometer 3230 湿膜轮 | 0~200μm | 10.0μm | K0003230M005 |
| Elcometer 3230/6 | Elcometer 3230 湿膜轮 | 0~250μm | 12.5μm | K0003230M006 |
| Elcometer 3230/7 | Elcometer 3230 湿膜轮 | 0~300μm | 15.0μm | K0003230M007 |
| Elcometer 3230/8 | Elcometer 3230 湿膜轮 | 0~400μm | 20.0μm | K0003230M008 |
| Elcometer 3230/9 | Elcometer 3230 湿膜轮 | 0~500μm | 25.0μm | K0003230M009 |
| Elcometer 3230/10 | Elcometer 3230 湿膜轮 | 0~1000μm | 50.0μm | K0003230M010 |
| Elcometer 3230/15 | Elcometer 3230 湿膜轮 | 0~1500μm | 75.0μm | K0003230M015 |
| Elcometer 3230/11 | Elcometer 3230 湿膜轮 | 0~2000μm | 100μm | K0003230M011 |
| Elcometer 3230/12 | Elcometer 3230 湿膜轮 | 0~3000μm | 150μm | K0003230M012 |
| Elcometer 3230/1a | Elcometer 3230 湿膜轮 | 0~1mils | 0.05mils | K0US3230M001 |
| Elcometer 3230/2a | Elcometer 3230 湿膜轮 | 0~2mils | 0.1mils | K0US3230M002 |
| Elcometer 3230/3a | Elcometer 3230 湿膜轮 | 0~4mils | 0.2mils | K0US3230M003 |
| Elcometer 3230/4a | Elcometer 3230 湿膜轮 | 0~6mils | 0.25mils | K0US3230M004 |
| Elcometer 3230/5a | Elcometer 3230 湿膜轮 | 0~12mils | 0.5mils | K0US3230M005 |
| Elcometer 3230/6a | Elcometer 3230 湿膜轮 | 0~20mils | 1mils | K0US3230M006 |
| Elcometer 3230/7a | Elcometer 3230 湿膜轮 | 0~40mils | 2mils | K0US3230M007 |
| 附件 | 15cm（5″）湿膜轮手柄 | KT003230N003 |
| 50cm（19″）湿膜轮手柄 | KT003230N002 |
| 100cm（39″）湿膜轮手柄 | KT003230N001 |
Elcometer 3230 湿膜轮
| 符合以下标准 |
| ASTM D1212-91-A | BS 3900-C5-1B |
| ISO 2802-1B | NF T30-125 |
How to use a Wet Film Wheel - Elcometer 3230 Wet Film Wheel
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film wheel should be perpendicular to the substrate and the thickness of the coating should be stated as that indicated on the central wheel - ensuring that the wheel has been rolled from maximum thickness to minimum thickness - thus avoiding surface tension.
Example
Hold the wheel by its central spindle. Begin at maximum thickness to reduce risk of inaccuracy caused by surface tension.
Roll the wheel through the wet film with the side 1 in the diagram touching the substrate. Roll for at least one whole turn and slowly enough for wetting to occur. Roll the wheel backwards by at least on complete turn. The wet film thickness is read from the scale, at the end of the wetted segment of the middle circle, 2 in the diagram
To use wheel on pipes, measure across the longitudinal axis (lengthways) of the pipe.
On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness